For the power system shown in figure 3 perform two iterations of Newton Raphson method using flat start and obtain bus voltages at the end of two iterations.
engineering
Description
Question 4
For the power system shown in figure 3 perform
two iterations of Newton Raphson method using flat start and obtain bus
voltages at the end of two iterations. Using this solution compute the real and
reactive power flow in the transmission line and transmission loss in the line.
Also calculate real and reactive power generation of the slack bus. The loads
connected to bus 2 and bus 3 are , respectively.
The line is modeled as a nominal PI model. The series impedance of the line is The
shunt admittance of the nominal PI model is and connected as shown in figure 3. The
voltage at the slack bus is 1.03 p.u. The generator at bus 2 generates
