DSFSS ELECTRONIC SECURITY – PROJECT ASSIGNMENT NO. 1
1
Students
are required to prepare a security protection plan for a proposed development
based on the current security environment.
2
This
is an individual project assignment.
3
A
description of the project assignment is attached - See Annex A & B (site layout
plan).
4
A total of 2 sessions have been allocated for
this security project assignment. In the 1st session, students will
be briefed on the project requirements. A 2nd session (Monday 8 Jun
20) is allocated to provide an opportunity for students to clarify any points
they may have encountered while preparing for the project submission.
5
A
written report submission of a word limit of 3500 words is required. The
submission date is 29 Jun 20.
(Note: Marks will be deducted for late
submission).
6
A
project carries a weightage of 40
marks (40%) as part of overall assessment of this subject.
ANNEX A
DSFSS ELECTRONIC SECURITY – PROJECT ASSIGNMENT
NO.1
1 An International Bank is proposing to construct a new Priority
Bank at Tengah. It is a single storey building consisting of Bank teller
counters, Bank office and Bank Vault.
2 The
facility is surrounded by Office buildings, High Embankment Slope and Over Grown
Vegetation & Open Field. The facility will operate from 0900-1500hrs and
closed during Saturdays and Sundays. The facility is manned only during working
hours.
3 The
layout for the building has been confirmed by client with the following physical
measures and manpower deployment:
a
Welded
Mesh Perimeter Fence.
b
One
security guard during office hours.
4
Students are required to design the External and Internal
Intrusion Detection System (Ext & Int IDS) for this new facility.
5 The Ext & Int IDS
design should be based on the following threats identified:
a Internal Threats –
Internal Theft, Arson, Vandalism, Sabotage, Theft of confidential information and
Cyber.
b External Threats –
Intrusion, Theft, Arson, Vandalism, Sabotage, Theft of confidential information
and Cyber.
c High Level Threat – Vehicle
Ramming into facility.
6 You are required to carry
out a risk assessment based on the above mentioned threats.
7 The project assignment
should include:
a A description of proposed Ext
& Int IDS design based on Protection in Depth and surrounding environment.
b Objective and functions of
each proposed device.
c Location of all proposed devices.
8
Project
Report Format: -
a Introduction
b
Security Risk Assessment.
c
Proposed Ext & Int IDS design concept.
i
Adjacent
areas
ii
Perimeter
protection
iii
Building
perimeter
iv
Space
v
Object
d
Brief description of all proposed devices and their functions.
e Conclusion
Get Free Quote!
302 Experts Online