The voice is transferred from the mobile phone application to the Bluetooth module connected to the Arduino.
engineering
Description
1. Voice controlled robot using Arduino
Robot should be controlled by
the given voice commands from the phone. The voice is transferred from the
mobile phone application to the Bluetooth module connected to the Arduino.
Based on the commands for ex: If we say “10 forward” the robot should move 10
centimetres forward.
Required
Components:
1. Arduino UNO with cable
2. Bluetooth HC-05
3. L293D motor driver
4. Two-wheel robot chassis
5. Two dc motors
6. jumper wires
7. mini breadboard
8. 9v battery (power bank)
9. 2 Battery clip connectors (1 connector must be
suitable with dc jack on arduino)
10. Speed sensor with encoder wheel
2. IoT controlled smart home
Setup a
Google assistant applet from IFTTT to trigger a web request which will update a
field in ThingSpeak cloud. Then read the data from ThingSpeak cloud using
arduino to control the appliances in your home from anywhere in the world.
Ex:- From your
mobile phone, if you say- “ok google” Turn on the light” from anywhere, it
should turn on the light in your home.
Required
Components:
1) Arduino Uno with cable
2) Esp8266(Wi-Fi module)
3) 5v Relay two channel
4) 230v bulb along with holder
5) Wires
6) Jumper cables
